Built to meet or exceed the requirements of the U.S. MIL-STD 810 C/D/E standards, the VX-160 is designed to survive under difficult operating conditions of shock, vibration, and driving rain. Cost-performance begins with durability, and the Mil-Spec toughness of the VX-160 is your guarantee of its design quality.

• 16 CHANNEL CAPACITY
• 5 WATTS POWER OUTPUT (Selectable to 1 Watt)
• MIL-STD 810 C/D/E
• 12.5/25 kHz BANDWIDTH PROGRAMMABLE BY CHANNEL
• ARTS™ (Auto Range Transponding System)
• SUPER RUGGED CONSTRUCTION
• CTCSS / DCS ENCODE + DECODE
• DTMF ANI
• VERSATILE SCANNING FEATURES
• DUAL 2-TONE DECODE
• BCLO, BTLO, AND TOT
• TX/RX BATTERY SAVER CIRCUIT
• PC PROGRAMMING
• RADIO TO RADIO CLONE FEATURE
• 500 mW AUDIO OUTPUT

Built to meet or exceed the requirements of the U.S. MIL-STD 810 C/D/E standard. the VX-180 is designed to survive under difficult operating conditions of shock, vibration, and driving rain. Cost-performance begins with durability, and the Mil-Spec toughness of the VX-180 is your guarantee of its design quality.

• 16 CHANNEL CAPACITY
• 5 WATTS POWER OUTPUT (Selectable to 1 Watt)
• 8-CHARACTER ALPHANUMERIC DISPLAY
• 12.5/25 kHz BANDWIDTH PROGRAMMABLE BY CHANNEL
• 3 PROGRAMMABLE OPERATING FUNCTION KEYS
• CTCSS / DCS ENCODE + DECODE
• DTMF ANI
• DUAL 2-TONE DECODE
• VERSATILE SCANNING FEATURES
• BCLO, BTLO, AND TOT
• TX/RX BATTERY SAVER CIRCUIT
• PC PROGRAMMING
• RADIO TO RADIO CLONE FEATURE
• 500 mW AUDIO OUTPUT

2-tone encode/decode, 5-tone encode/decode, Inversion scrambler, Multiple Scan Modes, DTMF ANI and many other 'standard' features.

• Options for: Digital Voice Storage and Rolling Code Encryption.
• 32 Channel Capacity: the VX-410 has two banks of 16 channles. Two banks of 16 channels makes them easy to manage.
• 2-tone Encode and Decode are built in. The dual 2-tone feature is included as well as 2-tone encode.

Features requested by our dealers and end users, built in over the air functions:

• Stun
• Kill
• Revive
• Auto TX
• Transpond
• Squelch (Mute)control
• Scan Start/Stop
• Emergency call Reset
• Choice of seven different alert tones (programmable per decode set)

Programmable Function Buttons can be programmed for:

• Monitor
• Squelch off
• Low Power
• Scan
• Follow-Me Scan
• Dual Watch
• Talkaround
• Call/Reset
• Speed Dial
• TX Power SAVE Off
• Call 1 ~ 3
• Group
• ACC1
• ACC2
• Play
• Record
• Encryption

Audio Compander for wide or narrowband chanels: programmable per channel, the audio compander is available for both wide and narrowband channels.

Voice Encryption: inversion type voice encryption is built in! No added board, no added cost!

• Monitor
• Squelch off
• Low Power
• Lock
• Lamp
• Channel Up
• Channel Down
• Scan
• Follow-Me Scan
• Dual Watch
• Talkaround
• Add/Del Scan
• Call/Reset
• Speed Dial
• TX Power SAVE Off
• Call 1 ~ 3
• Code Select
• Group
• ACC1
• ACC2
• Play
• Record
• Encryption

Audio Compander for wide or narrowband chanels - programmable per channel, available for both wide and narrowband channels.

Voice Encryption - inversion type voice encryption is built in! No added board, no added cost!

8 character display - the VX-420 adds an 8 character display to show channel names.

32 Channel Capcity - the VX-420 has two banks of 16 channles making them easy to manage.

2-tone Encode and Decode are built in. The dual 2-tone feature is included as well as 2-tone encode.

Built in Over The Air Kill, Stun, Revive.... and more! Features requested by our dealers and end users, built in over the air functions. These include: Stun Kill Revive Auto TX Transpond Squelch (Mute) control Scan Start/Stop Emergency call Reset Choice of seven different alert tones (programmable per decode set).

Integrated Keypad: built in 16 key DTMF keypad adds DTMF signaling as well as 4 additional programmable keys (A ~ D). That brings the number of programmable keys on this small portable to 6!

When communication is critical, you can't leave it to chance. The VX-800 Series portables are specifically designed to perform in the most demanding and critical conditions. Manufactured to strict ISO 9002 and MIL-STD specifications, the VX-800 series will perform when you need it most. With industry leading features such as Lithium lon battery technology and advanced programmable user defined features, the VX-800 series sets the standard for Public Safety applications now, and in the future.

The VX-900 gives you the reliability and dependability you require, built to meet the punishing test procedures of MIL-STD 810 C, D, & E, as well as the highest-level Intrinsically Safe rating. With a Weather Sealed mic connector, built-in Noise Canceling Microphone, and a loud 700 mW audio output stage, this very capable and rugged package is ready to serve your communications needs.

• 512 CHANNEL CAPACITY
• WIDE-BAND COVERAGE
• 5 WATTS POWER OUTPUT
• LONG BATTERY LIFE
• SIXTEEN-POSITION ROTARY CHANNEL SELECTOR
• 12.5/25 kHz BANDWIDTH PROGRAMMABLE PER CHANNEL
• MIL-SPEC CONSTRUCTION
• DIE-CAST CHASSIS AND WEATHERPROOF CASE DESIGN
• NON-WIRE MAIN BOARD CONSTRUCTION
• SINGLE/DUAL PRIORITY SCAN MODES
• NOISE CANCELING MICROPHONE
• WATER SHIELD MICROPHONE CONNECTION
• MIL-SPEC SPEAKER/MIC AVAILABLE
• LOUD 700 mW AUDIO OUTPUT
• 8-CHARACTER ALPHANUMERIC, INVERTIBLE LCD DISPLAY
• PROGRAMMABLE SOFT KEYS (4- and 8-Key Models Available) AND 3-POSITION TOGGLE SWITCH
• DTMF SIGNALING & DIALING FEATURES
• USER-SELECTABLE TONES/CODES
• CTCSS/DCS ENCODE + DECODE
• EMERGENCY FUNCTIONS
• ENCRYPTION
• EMBEDDED MESSAGE
• RADIO-TO-RADIO CLONE FEATURE
• TALK AROUND
• BCLO, BTLO, AND TOT FUNCTIONS
• PROGRAMABLE MINIMUM VOLUME

Reliable in operation, and flexible in setup options, the VXR-9000 is a high-tech 50-Watt FM Repeater designed for advanced commercial applications. Its slim-line design is crafted for easy installation in a standard 19-inch rack mount, and all programming parameters may be accomplished in minutes using a personal computer and Vertex Standard's CE60 Programming Software.

• Frequency Range: 148 – 174 Mhz (VHF), 450 – 490 Mhz (UHF)
• 32 Channels Synthesized
• Power Output: 50/25/10 W (High/Mid/Low)
• Wide or Narrow Bandwidth Programmable per Channel
• PLL Step Sizes: 2.5/5.0/6.25 Khz
• Low Level and High Level Encryption Options
• 3.15" Square Cooling Fan with "Malfunction" Sensor Output
• CTCSS Reverse Burst with Programmable Length
• Multi-Tone Decode
• 5-Step Command Sequence for Startup, Power Source: Main to Sub, And Sub to Main
• CW ID and CW Messages Selected by Trigger
• Coaxial Relay Drivers for Single Antenna Operation; also TX Attenuator
• Programmed Message Banks for Maintenance Logs or any Other Free Text
• Repeater Occupation Settings to Hold the Last Tone Code (Preset Timer)
• Audio Voice Companding Built In
• Channel Scanning with Priority Channel
• Automatic DC Backup Switching with Alert

With a long list of built in features, the VXR-7000 Series Base/Repeater Station sets the standard for mid-power, continuous duty base station and repeater applications. This unit offers unmatched features for all segments of industry and Public Safety. Whether used as a base station, with its attractive housing and user-friendly controls, or as remote repeater in the most demanding environments, the VXR-7000 will provide years of reliable service.

• As a base, it can be used with the optional MD-11A8J desktop microphone. It has a front facing speaker for loud and clear receive audio and 16 channels to select from. The built in DTMF decoder is a perfect fit with our Emergency and ANI functions built into our mobiles and portables.
• As a repeater, it has a built in multi-tone feature that allows it to operate up to 16 sub-audible signaling tones on a single channel.

It can also be used at the same time as a full featured repeater and a base station. If the dispatcher presses the PTT, it automatically switches to base mode and switches back to repeat mode as soon as the PTT is released.